 |
Noxxa Electric Multifunction Pressure Cooker – Recipes
DVD
This DVD contains ten step-by-step recipes using the NEMPC. It
is available in BM, English and Chinese. This DVD will assist you
and your customers in learning how to use the Noxxa Electric Multifunction
Pressure Cooker. It is also a good retailing tool to
assist you to retail the NEMPC to your customers. |
|
- Choice of High & Low Pressure
- Multiple functions - Slow Cook, Steam, Stir Fry
- Reheats and keeps food warm
- Delay Timer up to 8 hours.
- 8L non-stick pot.
Inner pot size
- Diameter : 26.2cm
- Height : 17.5cm
| Cleaning/Maintenance Tips: |
| • |
Unplug and let the unit cool before cleaning. |
| • |
Wash the removable cooking pot with warm soapy
water. Rinse and dry thoroughly. |
| • |
Wipe the outer housing and lid with a clean cloth.
Do not submerge in water. |
| • |
Remove the condensation reservoir by pulling
down. Clean with warm, soapy water. Rinse and dry thoroughly. Replace by
pushing up. |
| • |
Turn the lid upside down, grasp the silicone
gasket on either side and pull up. Clean the silicone gasket in warm soapy
water. Rinse and dry thoroughly. Replace the gasket by pushing it down inside
the edge of the lid. Make sure the groove in the centre of the gasket is
positioned around the metal ring on the inside edge of the lid. If the gasket
is not positioned properly, the unit will not work. |
| • |
In order to maintain good performance of your
cooker, the bottom of the removable cooking pot in the area of the sensor
pad must be cleaned after each use. Wipe with a soft damp cloth and be sure
to dry thoroughly. |
| • |
Never use abrasive cleaners or scouring pad to
clean any of the parts. |
| |
NOTE: The silicone gasket must always be properly
positioned on the underside of the lid. Check periodically to make sure
that it is clean, flexible and not cracked or torn. If silicone gasket is
damaged, replace it before using the cooker. |
| Cleaning the pressure regulator knob: |
| Check that the pressure regulator knob and the
pressure safety valves are in good working order before each use. |
| • |
After the unit has cooled, remove the lid. |
| • |
Press down and turn the pressure regulator knob
counter clockwise past the STEAM setting and carefully remove. |
| • |
Turn the lid over and place on a table top. Pull
out the anti-blocking case. Using a brush, check and remove any food or
foreign particles that may be lodged in the floating valve. Replace the
antiblocking case. |
| • |
Replace the pressure regulator knob by lining
the notches up to the inside wall of the pressure regulator chamber in the
lid and turn clockwise. |
One (1) year warranty against manufacturing defects. Please note that this appliance is strictly for HOUSEHOLD USE only.
For further information, please click HERE.
|
DSA Code of Ethics | Code of Conduct
